Licensed & Insured, in Midland and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Midland
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (432) 224-0791 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Midland and surrounding areas · On-site visits included · Free estimate within 24h
Midland Metal Roofing is a team of local certified professionals based in Midland. We respond quickly in Midland and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (432) 224-0791⭐⭐⭐⭐⭐ 4.9/5 · 199 verified Google reviews
“We had Midland Metal Roofing out to put a new metal roof on our 12,000 sq ft warehouse after the old one started failing. They worked around our loading schedule so we never had to shut down operations, and the crew of six had it done in under two weeks. The standing seam panels look sharp and we've had zero issues through two big rainstorms already.”
Commercial Metal Roofing
“I wanted a copper awning over our front entry to replace the old rotting wood one, and these guys knew exactly what they were doing with the copper flashing and panels. It's a small job but they treated it like it mattered, and the patina is already starting to develop nicely. Only reason it's not five stars is the scheduling took a bit longer than quoted, but the finished work is beautiful.”
Copper & Specialty Metal Roofing
“Needed a metal roof on a new hay barn out on our property and these folks handled the whole thing from panels to trim. The ribbed panels went up straight and tight, and they even added snow guards since we get some ice out here in the winter. Solid crew, fair price, and they cleaned up every last screw and scrap before leaving.”
Commercial & Agricultural Metal Roofing
“After getting three quotes we went with Midland Metal Roofing for our house and I'm glad we did. They installed a stone-coated steel roof that looks like tile but holds up way better, and the whole thing took about five days. The crew was respectful, kept the yard tidy, and walked me through the flashing details around the dormers.”
Metal Roof Installation
“We had a leak that only showed up around the chimney during heavy rain, and two other roofers couldn't figure it out. Midland Metal Roofing found the failed flashing right away and fixed it in one afternoon. No leaks since, even after that big storm last month. Really relieved to finally have it sorted.”
Chimney & Skylight Repair
“They installed new gutters sized for our metal roof and rerouted the downspouts so water actually drains away from the foundation now. The old setup was washing out part of the yard, and honestly the difference is night and day. Quick job, no mess left behind, and the price was right.”
Gutters for Metal Roofs
“We went with the retrofit over our existing shingles instead of a full tear-off and it saved us a ton of money and time. The crew of four knocked it out in three days and the corrugated panels look great on our ranch house. Only small gripe is they showed up a little later than scheduled on day one, but they made up for it.”
Metal Roof Over Shingles (Retrofit)
“Our red brick house had an old metal roof that was rusting through in spots, so we had Midland Metal Roofing tear it off and replace it with new standing seam panels. They matched the trim color to the brick perfectly and the house looks ten years newer. Three months in and not a single leak or loose screw.”
Metal Roof ReplacementReal photos of our work in Midland · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, ribbed or corrugated panels, and standard trim; roof size and slope move the number. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners, raised seams, premium underlayment, and high-wind edge metal; complexity and panel gauge affect the final rate. |
| Stone-coated steel installation | Starting at $11/sq ft | Class 4 textured panels with shingle-style profile; roof pitch, valleys, and penetration count drive the price. |
| Metal roof over shingles (retrofit) | On estimate | Needs an on-site look to verify existing layer count, deck condition, and code limits before pricing. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and standard trim; roof pitch and complexity move the price |
| Tear-off and replacement | Starting at $12/sq ft | Includes removal of existing shingles, deck inspection, and disposal; number of existing layers affects cost |
| Class 4 impact upgrade | On estimate | Heavier gauge panels and tested impact rating priced after roof measurement and hail-zone review |
| Complex roof or steep pitch | On estimate | Valleys, dormers, multiple penetrations, and steep pitches need an on-site look before we quote |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic metal replacement | Starting at $9/sq ft | Tear-off, deck inspection, underlayment, and exposed fastener panels included; pitch and roof size move the rate |
| Standing seam replacement | Starting at $13/sq ft | Concealed fastener system with raised seams; panel gauge and trim complexity drive the price up |
| Stone-coated or metal shingle | Starting at $12/sq ft | Impact-rated stamped panels with matching trim; roof cut-up and valley count affect labor |
| Complex or large-scale job | On estimate | Multi-layer tear-off, deck repair, or steep two-story work needs an on-site look before a number |
| Travel | Included | in Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles (exposed fastener) | Starting at $7/sq ft | Includes underlayment, purlins, panels and basic flashing; pitch and deck condition move the price. |
| Retrofit with standing seam panels | Starting at $11/sq ft | Concealed fasteners and premium panels; panel gauge and roof complexity drive the final number. |
| Retrofit with stone-coated steel | Starting at $10/sq ft | Textured panels for HOA or historic district approval; profile and color selection affect cost. |
| Deck repair or replacement before retrofit | On estimate | Needs an on-site look to scope soft spots, rot, or framing repairs before panels go on. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration or seam reseal | Starting at $450 | Covers one failed pipe boot, seam, or short fastener run, with metal-rated sealant included. |
| Panel replacement (1 to 3 panels) | Starting at $850 | Includes matching panel, fasteners, and sealant; pitch and roof height move the price. |
| Full slope re-fastening | On estimate | Screw count, roof size, and access determine the number, so we quote after inspection. |
| Flashing or chimney repair | On estimate | Scope depends on whether we rebuild the flashing or replace it, plus access difficulty. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak repair (fasteners, short seam) | Starting at $450 | Includes leak diagnosis, source tracing, and repair of a small number of fasteners or a short seam section. |
| Flashing or penetration repair | Starting at $650 | Covers rebuilding flashing at a chimney, skylight, or pipe boot, with access and height affecting the final price. |
| Panel replacement (single panel) | Starting at $850 | Includes removing the damaged panel, matching profile and color, and installing new fasteners and underlayment. |
| Emergency tarping after storm | Starting at $350 | Same-day or next-day tarping to stop active water intrusion, with the permanent repair quoted separately. |
| Complex or large-scale job | On estimate | Multi-panel damage, widespread fastener failure, or steep two-story access needs an on-site look before pricing. |
| Travel | Included | in Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | From $750 | Pulls and replaces failed fasteners and washers on flagged slopes, includes leak check |
| Full field re-fastening | From $1,450 | New screws and EPDM washers across the roof, priced by square and fastener count |
| Oversized screw upgrade | On estimate | Step-up fasteners where holes have wallowed, needs an on-site look at the purlins |
| Commercial or agricultural roof | On estimate | Shop, barn, and equipment-yard roofs priced by slope count and access |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple ranch or shop | Starting at $5.50/sq ft | Includes panels, underlayment, closures and standard fastening on an accessible low-slope roof. |
| R-panel roof with high-wind screw pattern | Starting at $6.75/sq ft | Adds perimeter and ridge fastening, sealed closures and heavier gauge for exposed country lots. |
| Tear-off and deck repair before panel install | On estimate | Priced after we inspect deck condition, existing layers and access, since scope varies widely. |
| Re-fasten and reseal existing panel roof | Starting at $1.25/sq ft | Includes pulling worn screws, replacing washers and resetting closures on an existing panel field. |
| Travel | Included | in Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, simple gable | Starting at $9/sq ft | Includes tear-off, underlayment, standard trim, and disposal on a straightforward single-story roof. |
| Metal shingle roof, complex roof | Starting at $12/sq ft | Hips, valleys, dormers, and steep pitches add labor and custom trim pieces. |
| Retrofit over existing shingles | On estimate | Requires deck inspection and code check on existing layers before a number is given. |
| Hail-damage replacement | On estimate | Scope depends on adjuster report and deck condition found during tear-off. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-Coated Steel Roofing, basic ranch | Starting at $9/sq ft | Includes tear-off, underlayment, battens, and panels on a straightforward single-story roof with good access. |
| Stone-Coated Steel, two-story or complex roof | Starting at $12/sq ft | Covers steep pitch, multiple valleys, and chimney or skylight flashing on larger Midland homes. |
| Stone-Coated Steel over existing shingles | Starting at $8/sq ft | Retrofit over one sound layer, subject to code limits on existing roof layers and deck condition. |
| Stone-Coated Steel repair or re-fastening | On estimate | Priced per panel and flashing scope after an on-site inspection of the damaged area. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window roof | Starting at $20/sq ft | Includes custom fabrication, soldered flashing, and underlayment; price rises with roof complexity. |
| Zinc or aluminum accent roof | Starting at $18/sq ft | Covers entry canopies and small roof sections; access and height drive the final number. |
| Full architectural copper roof | On estimate | Requires on-site measurement for valleys, dormers, and multiple flashings before quoting. |
| Custom flashing and trim fabrication | On estimate | Priced per detail; complex chimneys and skylights need a shop visit to quote accurately. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Acrylic reflective coating system | Starting at $2.50/sq ft | Includes pressure wash, rust spot treatment, primer and two finish coats on sound panels. |
| Rust conversion and recoating | Starting at $3.25/sq ft | Adds chemical rust conversion and spot priming at fasteners and panel laps before topcoat. |
| Fastener replacement plus coating | Starting at $3.75/sq ft | Covers failed screw and washer replacement under the coating system, priced by count and access. |
| Commercial or agricultural shop building | On estimate | Roof height, square footage and rust severity vary too much to quote without an on-site look. |
| Travel | Included | in Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pipe boot or vent collar replacement | Starting at $600 | Includes new UV-rated boot, sealant, and water test on a single-story roof |
| Chimney re-flash with new counter-flashing | Starting at $1,200 | Custom bent metal, cricket if needed, and sealant rated for Permian Basin sun |
| Skylight curb re-flash | Starting at $950 | Curb cap reset or rebuilt and sealed to the panel; price rises on steep or two-story roofs |
| Full flashing rebuild on an older home | On estimate | We inspect the deck and all transitions before quoting a full tear-out and rebuild |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential guard run | Starting at $1,200 | Includes guard layout, clamps or brackets, and installation over a typical entry or walkway. |
| Steep or two-story roof | Starting at $1,600 | Higher access and setup drive the price on steep two-story homes in northwest Midland. |
| Long run or multiple release zones | On estimate | Linear footage, guard count, and the number of release zones decide the scope. |
| Complex or large-scale job | On estimate | Custom brackets, unusual panel profiles, or commercial roofs need an on-site look first. |
| Travel | Included | In Midland and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof inspection with photos and a written repair versus replacement recommendation. |
| Minor panel and fastener repair | Starting at $350 | Small panel repairs and re-fastening on accessible single-story roofs, priced by damage count. |
| Ridge cap, trim, and flashing repair | Starting at $650 | Wind-lifted trim and flashing rebuilds, with cost driven by roof pitch and height. |
| Widespread re-fastening | On estimate | Systemic fastener or washer failure needs an on-site count before a number is given. |
| Travel | Included | In Midland and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (432) 224-0791, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk-over with photo report; price moves with roof size, pitch, and access. |
| Post-storm insurance documentation | Starting at $250 | Hail and wind damage report with photos; cost rises with roof complexity and number of penetrations. |
| Pre-sale or buyer inspection | Starting at $300 | Written condition report for real estate; price depends on roof size and panel type. |
| Complex or large-scale roof | On estimate | Steep, multi-level, or commercial roofs need an on-site look before we quote. |
| Travel | Included | in Midland and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (432) 224-0791, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes 5-inch or 6-inch seamless aluminum, hidden hangers, and basic downspouts on a single-story roof. |
| Two-story or steep-pitch installation | Starting at $13/linear ft | Higher access, tighter hanger spacing, and more labor on steep panel pitches drive the increase. |
| Gutter guards and debris screens | Starting at $6/linear ft | Screens sized for blowing dust and mesquite leaf load, priced by the foot of gutter covered. |
| Half-round or specialty profile | On estimate | Profile, material, and bracket type vary enough that we measure on site before quoting. |
| Commercial or agricultural box gutter | On estimate | Fabricated rectangular runs and reinforced hangers need an on-site look at the building and drainage. |
| Estimate | Free | Response within 24 hours at (432) 224-0791, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free on-site estimate | Free | We measure the building, check the deck, and give you a written scope with no obligation. |
| Ribbed exposed-fastener panels | Starting at $4.50/sq ft | Economical screw-down system for barns and sheds, priced by square footage and access. |
| Standing seam installation | Starting at $8.50/sq ft | Concealed fasteners and raised seams, priced by panel gauge, pitch, and building height. |
| Retrofit over existing roof | On estimate | Needs an on-site look at deck condition, purlin spacing, and how much tear-off is required. |
| Repair and re-fastening | Starting at $350 | Minimum service call covers leak diagnosis, screw replacement, and minor flashing work. |
| Travel | Included | In Midland and surrounding counties, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Midland need a crew that understands the Permian Basin, not a storm chaser passing through after hail season. Midland Metal Roofing is your local source for metal roof installation, replacement, re-roof, and repair on the brick ranches of Grassland Estates, the mid-century homes near the Midland Country Club, and the newer two-story subdivisions spreading across north and northwest Midland and Odessa.
We work on the flat high plains at roughly 2,800 feet, where intense sun, spring hail, dust storms, and constant wind punish every roof. The housing stock here includes a large number of aging screw-down roofs whose fasteners are backing out, plus ranch houses and metal shops across Martin and Glasscock counties. Whether you need a standing seam system on a stucco two-story or a service call on a corrugated panel barn, our network of licensed, insured local contractors handles it.
Metal roofs do not fail randomly. On 15 to 30 year old exposed-fastener roofs, the number one cause of leaks is fasteners backing out as the EPDM sealing washers dry, shrink, and crack under year-round sun. Once that seal is gone, water finds the hole. Seam separation from thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind, along with wind-lifted panels after a spring storm and punctures from fallen mesquite limbs. Our metal roof repair team diagnoses the actual entry point rather than guessing.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from where it enters, rotting sheathing and soaking insulation before you see a stain inside. That is why we push for a proper metal roof leak repair assessment early, including a close look at fastener and sealing washer condition across the whole field of the roof.
The honest call is not always replacement. A full screw replacement and re-fastening often restores a watertight roof for a fraction of the cost of a new one, and we will tell you plainly when that is the right move versus when the panels or decking are too far gone. Call (432) 224-0791 to schedule an inspection, or request a free estimate and we will walk the roof with you.
We install the full range of systems and match them to the home, not the sales pitch. Standing Seam Metal Roofing uses concealed clips and no exposed screws, making it the premium choice for a primary residence. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also handle Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and distinctive homes.
The tradeoff is simple: standing seam costs more and has no exposed fasteners to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound and code allows it; when the deck is not sound, tear-off is the right answer. We will say so either way.
Metal roof pricing in Midland is typically quoted per square foot for installations and often flat-rate for repairs. The variables that move the number are the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range because final pricing depends on the roof and site conditions, and we would rather inspect than guess. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
For ballpark figures and what drives them, see our pricing page, then request a free estimate or free roof inspection so we can give you a real number for your home.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document the damage accurately and let you make an informed decision.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements, thresholds, fees, and inspection requirements vary by city, and recover over existing shingles is limited by code to a set number of existing layers. Historic district and HOA design review can also restrict panel profile and color choices. Requirements vary, so always verify with the Midland building or planning department before starting your project. Contact us with questions and we will point you in the right direction.
Ready to get started? Midland Metal Roofing serves in Midland and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Midland · Response within 24h · No commitment · ☎ (432) 224-0791
Your Free Quote Request